SICK安全門開關參數

SICK安全門開關參數塑料窄型外殼 ? 固定或活動激勵元件 ? 一個M16*1.5線纜輸入端子 ? IP67防護等級 用于監控安全門的開關狀態； ? 由開關本體和激勵原件兩部分構成； ? 外殼防護等級達到IP67；

SICK安全門開關參數6029030
 activation commands that cause dangerous
conditions, may only become active when the
guard is in the protective position and the
dangerous conditions have been terminated
before the protective position is cancelled.
Prior to the use of safety switches, a risk assessment
must be performed on the machine in accordance
with EN ISO 12100, Safety of machinery —
General principles for design — Risk assessment
and risk reduction.
Applications of the safety switches
Safety switches of the i12S series are electromagnetic
switching devices.
SICK安全門開關參數6029030
The i12S safety switch must be used only as defined
in section 2.2 “Applications of the safety
switches”. The safety switch must be used only on
the machine where it has been mounted, installed
and initialized by qualified safety personnel in
accordance with these operating instructions.
All warranty claims against SICK AG are forfeited in
the case of any other use, or alterations being
made to the safety switch, even as part of its
mounting or installation.
They secure moving protective devices with a
guard function so that
 the dangerous state of the machine can only be
switched on when the guard is closed,
 a STOP command is triggered if the protective
device is opened while the machine is operating.
For the control this means that
SICK安全門開關參數6029030