YUKEN伺服閥/油研

YUKEN伺服閥/油研
電磁換向閥被關閉（如下所示流量從大偏移小和致動器
速度也同樣地移動切換時間可以通過先導
10 μm or finer and install it near the valve inlet.
installation drawing (P. 7 and 8) of the sub-plate used
當訂購密封請注明來自密封件號該表
權利除了上述的密封件密封件為先導閥包含在密封套件
other dimensions, refer to "Terminal Box Type".
For dimensions of the valve mounting surface, see the
installation drawing (P. 6 and 7
流設置調節(jié)旋鈕調節(jié)轉盤順時針轉動導致先導流量減少
When the solenoid operated directional
of the sub-plate usedate is shifted from minimum
For dimensions of the valve mounting surface, see the
valve is turned on ( shown below),the flow r
to maximum and the actuator speed is
also shifted likewise. The switching time can be set by the pilot flow
To carry out flow adjustments by a
s small degree as 2 L/min (.53 U.S.GPM) or less, be sure to use a line filter of
YUKEN伺服閥/油研

YUKEN伺服閥/油研